With the development of society, the competitiveness between all walks of life is getting bigger and bigger, and the tile industry is no exception. There are many customers of the store in the renovation because the store is not large. To show some tile samples, place some tile display racks in the store for these displays on how to install lamps and lanterns. The tile sample display effect is better. They are said to be more confused.

With the popularity of modern wind, the available tile store sample display is a perforated iron frame mostly made of vertical or oblique plates. Still, there are stores to show more samples, which will also be placed in the store with one or two tile display racks. A tile display rack can show floor tiles, wall tiles, and the number of partitions inside and can show more products in a small area.

And tile display rack and fixed vertical or oblique board in the lighting configuration are different, specifically in the following points.

1. vertical and oblique board surface is fixed, while the tile display rack in the sample is mobile.

2. Vertical and diagonal board display is a single layer, while the tile display rack in the sample board is multi-layer.

Here, the configuration of lighting, vertical and oblique board because it is fixed, the sample board is immobile, as long as you choose the right light, the light is adjusted to shine to the fixed sample tile can be. Still, the tile display rack is different. The sample board inside is moving and changing, and if the general lighting configuration method in the past, the light shines in a sample board center position. Still, in introducing customers, shoppers are to pull the sample board. Still, a pull so that the board is moving, and the light is not the original design of the center of the board, especially since the tile display is multi-layered. You set the weak center position in the outermost layer of the board. When the customer wants to see the innermost layer of the sample board, the light may be the center of the light at the bottom of the display board.

Tile display rack general light distribution method and the advantages and disadvantages of analysis.

1. Install ceiling spotlights within the tile display. The brightness is not enough, the light is not uniform, and some displays are not pre-installed.

2. In the tile display rack installed lamp, because the lamp light is scattered, uniform light but the light effect is not concentrated, tile surface texture display effect in general, especially the innermost layer of brightness, is not enough.

3. In the tile display rack installed downlight, downlight light is scattered, light uniform but not concentrated, tile surface texture display effect is general.

4. In the tile display rack installed track light, due to the market track light beam angle is generally 15 ° and 24 °, the installation of track lights on the display rack, if the aperture is small, shining in the tile surface is too concentrated, the display effect is general. If you must install track lighting on the tile display, we recommend the installation of ceramic showroom special lamp shovel light.

5. In the tile display rack outside the ceiling, installed track lights. If the installation of track lights at the right distance and track light beam angle is appropriate, light, and bright enough, then it is a more reasonable method of light distribution.

According to the above analysis, we recommend using the 5th light distribution method. Generally speaking, the ceiling in front of the tile display rack can be installed with track lighting. At present, the installation of track lighting is more reasonable and effective a way, then in the installation of the following points should be noted.

1. The installation distance should be reasonable.

2. Using the beam angle of 36 ° track light is recommended. The beam angle is too small and easy to causes exposure on the tile's surface, affecting the tile display effect.

3. it is recommended to use the light (spot) uniform track light, such as lens type track light because the spot is uniform, the sample in the showcase, no matter in which position, the light is uniform and soft, sample tile texture color display consistent.

4. Choosing a track light with high luminous efficiency is recommended. Only high luminous efficiency can be the innermost row of the tile display shelf, the sample plate, irradiation effect.

The above is about the tile display rack with the light of the relevant recommendations. If you need a more detailed understanding, welcome to contact us!